Traditional & Barebow Archers — What You Told Me
Hi there,
Feedback spotlight this week, and it is one I owe a specific group. When I built BowSmith I built it for the bow I shoot. Compound first, everything else second. The barebow, recurve and longbow archers on this list noticed, and told me — politely, repeatedly, and with screenshots. Here is what you said and what it changed.
“Everything assumes I have a sight and a stabiliser”
The most common reply, in a dozen phrasings. Tuning recommendations that told a barebow archer to check sight pins. A setup screen that would not call a bow “complete” without stabiliser rods. Balance-point maths that read zero for anything that was not a compound because it was using axle-to-axle as the riser length.
What changed: barebow, recurve and longbow setups now get their own tuning path instead of being routed into compound advice, and the balance-point calculation was fixed for non-compound bows. A barebow setup with riser weights only now reads as complete — because it is.
“My riser weights are not stabiliser rods”
Two archers sent the same screenshot a week apart: a riser weight rejected because it was shorter than the minimum stabiliser length. The app was forcing a barebow component into a compound shape.
What changed: riser weights are now their own component type, not a mislabelled rod, and you can enter them in grams. Small thing. It was the thing that stopped several of you from finishing a gear profile at all.
“String walking has nowhere to live”
The sharpest replies. A crawl chart is the core document of a barebow archer’s season, and BowSmith had no place to put one. The aiming-systems session could name string walking and then persist nothing about it.
New since October 7: a string-walking crawl chart for each bow and arrow set — distance to crawl, saved against the setup — and the ring checks for WA Barebow and IBO Barebow, which are two different 12.2 cm tests and used to be treated as one. Both are in the app now; if you have not updated since early October, update BowSmith first.
What I got wrong, honestly
I assumed the traditional community wanted a simpler app. It does not. It wants the same depth pointed at different things: crawls instead of sight tapes, riser mass instead of rod length, group shape instead of X count. The depth was there; it was aimed at the wrong bow.
Keep goingIf you shoot barebow, recurve or a stickbow and something in the app still assumes you do not, reply with a screenshot. Every item above started as one of those.
|
Lucznicy tradycyjni i barebow — co mi powiedzieliscie
Czesc,
W tym tygodniu przeglad opinii i jest to przeglad, ktory jestem winien konkretnej grupie. Budujac BowSmith, budowalem go dla luku, z ktorego sam strzelam. Bloczek najpierw, reszta potem. Lucznicy barebow, recurve i longbow z tej listy to zauwazyli i powiedzieli mi — grzecznie, wielokrotnie i ze zrzutami ekranu. Oto co powiedzieliscie i co to zmienilo.
„Wszystko zaklada, ze mam celownik i stabilizator”
Najczestsza odpowiedz, w tuzinie wersji. Rekomendacje strojenia, ktore kazaly lucznikowi barebow sprawdzic piny celownika. Ekran ustawienia, ktory nie chcial nazwac luku „kompletnym” bez stabilizatorow. Obliczenie punktu rownowagi, ktore dla wszystkiego, co nie bylo bloczkiem, dawalo zero, bo bralo rozstaw osi za dlugosc risera.
Co sie zmienilo: ustawienia barebow, recurve i longbow maja teraz wlasna sciezke strojenia zamiast przekierowania do porad dla bloczkow, a obliczenie punktu rownowagi zostalo naprawione dla lukow bez bloczkow. Ustawienie barebow z samymi obciaznikami risera odczytuje sie teraz jako kompletne — bo takie jest.
„Moje obciazniki risera to nie stabilizatory”
Dwoch lucznikow przyslalo ten sam zrzut ekranu w odstepie tygodnia: obciaznik risera odrzucony, bo byl krotszy niz minimalna dlugosc stabilizatora. Aplikacja wciskala komponent barebow w ksztalt bloczka.
Co sie zmienilo: obciazniki risera sa teraz wlasnym typem komponentu, a nie zle opisanym stabilizatorem, i mozna je wpisywac w gramach. Drobiazg. To byl drobiazg, ktory kilku z Was w ogole nie pozwalal dokonczyc profilu sprzetu.
„String walking nie ma gdzie mieszkac”
Najostrzejsze odpowiedzi. Tabela crawlu to podstawowy dokument sezonu lucznika barebow, a BowSmith nie mial miejsca, zeby ja zapisac. Sesja systemow celowania potrafila nazwac string walking i nie zapisac o nim nic.
Nowe od 7 pazdziernika: tabela crawlu dla kazdego luku i zestawu strzal — dystans do crawlu, zapisany przy ustawieniu — oraz testy pierscienia dla WA Barebow i IBO Barebow, ktore sa dwoma roznymi testami 12,2 cm, a wczesniej byly traktowane jako jeden. Obie rzeczy sa juz w aplikacji; jesli nie aktualizowales od poczatku pazdziernika, najpierw zaktualizuj BowSmith.
Co zrozumialem zle, uczciwie
Zakladalem, ze spolecznosc tradycyjna chce prostszej aplikacji. Nie chce. Chce tej samej glebi skierowanej na inne rzeczy: crawle zamiast tasm celowniczych, mase risera zamiast dlugosci stabilizatora, ksztalt grupy zamiast liczby iksow. Glebia tam byla; celowala w niewlasciwy luk.
Nie przestawajcieJesli strzelasz z barebow, recurve albo luku tradycyjnego i cos w aplikacji wciaz zaklada, ze nie strzelasz, odpisz ze zrzutem ekranu. Kazda pozycja powyzej zaczela sie od takiego zrzutu.
|